How to hang a flat mirror on a wall? I think that question will come to your mind after you set your mind to renovate your bathroom. When you’re renting an apartment, the size of your bathroom may not exactly be what you hoped for. However, that doesn’t mean that you have to settle for less when it comes to your bathroom.
In fact, with a bit of planning, monitoring, and measuring skills, you can transform almost any small bathroom into a spacious and luxurious place. Let’s face it: What most people think about when they hear “small bathroom” is something like this: Very little space; very little storage; very little functionality; and very little aesthetic appeal.
But that doesn’t have to be the case! If you follow these simple suggestions on how to hang a flat mirror on a wall so that it doubles as a storage unit at the same time, then getting ready in the morning will become so much easier!
Step 1: Measure and decide where you want to place your mirror
When choosing the location for your bathroom mirror, it’s important to keep two things in mind: The size of the mirror and the size of the wall. If you place a mirror that’s too large on a wall that’s too small, it will look as if you’re trying to make it appear as if that wall were bigger than it is.
If you place a mirror that’s too small on a wall that’s too large, it will look as if you’re trying to make it appear as if that wall were smaller than it is. For the best results, you’ll want to match the size of the mirror with the size of the wall it’s placed on.
The best way to do this is to use a measuring tape to measure the length and width of the wall. You could also try using a smartphone app that measures both length and width.
Step 2: Find the stud in that wall, and hammer a nail in
First, you’ll need to find the stud in the wall where you want to hang your mirror. If you don’t know how to find the stud, you’ll want to use a stud finder. A stud finder is a handheld device that you hold against the wall and slide back and forth.
When you see the stud appear on the screen, you know that you’ve found the right place to nail your mirror. To drive the nail deeper into the stud, you’ll want to use a hammer. When hammering the nail, you shouldn’t hit it with too much force. If you hit it too hard, you could end up hitting the stud and denting the wall.
Instead, you should hit it with just enough force to make the nail go a couple of inches into the stud. The nail should be long enough to go about halfway through the wall.
Step 3: Hanging a heavy mirror on a wall: The hard part
When a wall is framed, it’s not all that uncommon for walls to be framed with a stud in the middle of the wall, rather than on the edge. If that’s the case, you won’t be able to drive a nail into the wall, and you shouldn’t try.
Instead, you should try to find the stud on the other side of the wall, or find the source of the electrical wiring in that wall. If you can’t find the stud, or if you can’t find the source of the electrical wiring, you can use an anchor to hang your heavy mirror. If you have good aim, another option is to use a nail gun.
That way, you can be sure that the nail is being driven into the wall at the right angle and with the right amount of force. You can also use a small screwdriver to drive a screw into the wall. The screw should be long enough to go through the wall, but short enough so that it doesn’t poke out of the other side.
Step 4: Hang your heavy mirror
All you have to do now is place the mirror on top of the wall. When placing the mirror, make sure that you’re hanging it straight. You could also place the back of the frame against the wall, and then place the front of the frame against the wall.
That way, you’ll be able to tell whether the mirror is hanging straight by looking at the front of the mirror. There are many ways to hang a bathroom mirror on your wall. But the best way to do it is to use a heavy-duty wall mount. Wall mounts are designed to hold a lot of weight, so you don’t have to worry about your mirror falling off the wall.
